Samples Crush Tester CDM-5

Samples Crush Tester CDM-5

Description

Samples crush tester to perform compression strength tests on standardized samples of paper (liner & medium) and corrugated cardboard such as RCT, CMT, CCT, CLT, ECT, FCT and PAT.

  • Maximum force capacity: 5 kN (alternatively 10 kN).
  • Useful size of compression plates: 150×150 mm.
  • Maximum separation between compression plates: 140 mm.
  • Robust and precise equipment.
  • 1 load cell on the upper fixed and parallel plate.
  • Parallelism error between plates <1/2000.
  • Reading Resolution: 0.1N.
  • Force reading in (N – kg and Lb.
  • Strain reading in (mm and inches).
  • Automatic return at 100 mm/min..
  • RS-232 output interface with converter to USB.
  • Testing Software with basic statistics to perform RCT tests. CMT, CCT, CLT, ECT, FCT and PAT.
  • Compatible with the T-LAB Laboratory Management System.
  • CE marked.
  • Packaging paper (liner and fluting).
  • Corrugated board.
  • Board boxes.
  • Board packaging.

ECT  test: APPITA/AS 1301.444s, FEFCO 8, ISO 3037, ISO 13821, SCAN P33, TAPPI T811, TAPPI T823, TAPPI T838, TAPPI T839.

FCT  test: APPITA/AS 1301.429s, FEFCO 6, ISO 3035, SCAN P32, TAPPI T825.

RCT  test: APPITA/AS 1301.407s, ISO 12192, SCAN P34, TAPPI T822.

CMT test: APPITA/AS 1301.434s, ISO 7263, SCAN P27, TAPPI T809.

CCT  test: ISO 16945, SCAN P42, TAPPI T843.

PAT test: APPITA/AS 1301.430s, FEFCO 11, TAPPI T821.

Gallery: