Laboratory twin screw extruder LABTECH Engineering

Laboratory twin screw extruder LABTECH Engineering

Description

Laboratory twin screw extruders from 12 to 36 mm diameter, with ratio 60 L/D.

  • Laboratory extruder with two screws for the processing of thermo-plastics.
  • Easy to set up and operate.
  • Allows processing from small samples.
  • Screws and cylinder made of high grade Nitrided Steel.
  • Modular interchangeable cylinder sections.
  • Easy-to-open shell-type cylinder to view the degree of mixing during processing.
  • Each segment of the cylinder has resistance heaters and temperature control.
  • Modular screws configurable by the operator.
  • We have the following screws diameters: 12mm, 16mm, 20mm, 26mm and 36mm available with a 60 L/D ratio.
  • Water-cooled single screw feed hopper, optional side feeders.
  • Gravimetric feeders (single and twin), optional liquids.
  • Vacuum pump ventilation system.
  • Microprocessor or computerized version.
  • Screw speed up to 1100 rpm depending on model.
  • Power: 2.2 KW (for 16 mm model), 5.5 KW (for 20 mm) and up to 22 KW (for 26 mm model).
  • Maximum extrusion pressure 100 bar.
  • Heating power: 0.8 Kw (for 16 mm model), 1.6 KW (for mm) and 2.0 KW (for 26 mm model).
  • Maximum working temperature 400º C.
  • Production (for LDPE) between 5 Kg/hour up to 50 Kg/hour depending on the model

Processing of thermoplastic materials such as:
HDPE, LDPE, PP, PS, PA, PLA and ABS among others.

Gallery