• Single screw laboratory extruder for processing thermoplastics.
• Easy to set up and operate.
• Allows processing from small samples.
• Screws and cylinder made of high grade Nitrided Steel.
• Wide variety of screws; compression screws, screws with mixing zones, etc..
• We have the following screw diameters: 8 mm, 12.5 mm, 20 mm, 25 mm, 30 mm and 40 mm always with the ratio L/D 30.
• Feed hopper fitted with a screw and cooled by water.
• Air-cooled cylinder with optional venting system to remove volatiles.
• Different independent cylinder heating zones.
• High versatility with availability of a large number of peripherals to be able to obtain: film blowing lines of up to 9 layers, Cast film lines of up to 7 layers, pelletizers, blowing lines for containers, profiles, tubes, etc.
• Speed ​​range up to 300 rpm depending on model.
• Power: 1,970 (for 20 mm model), 4,000 (25 mm model) and 8,400 (30 mm model).
• Approximate output with LDPE Kg/hour: between 6 Kg and 35 Kg depending on the model.

Processing of thermoplastic materials such as
HDPE, LDPE, PP, PS, PA, PLA y ABS among others.