              
 
|
 |
 |
|
| |
CORRUGATED BOARD TESTING MACHINES
Our Corrugated Board Testing Machines represents the latest dimension in testing verification. With a vast array of products to perform numerous tests, one will be given the ability to increase the efficiency and durability of their testing material. Our Corrugated testing equipment provides the ability to test the various thicknesses of corrugated board samples along with crush, puncture, burst, SCT compression, 4 point bending stifness and permeability characteristics. We can meet the needs of global markets that have a wide range of products, facilities and budget constraints.
|
|
4-Point Bending Stiffness Tester
NOW, with 15" Laptop PC + LYNX Testing Software + LYNX Management Module with basic statistics, included
The Bending Stiffness is the ratio between the bending moment applied to astandard sample according to ISO 5628 and the deflection with in the elastic area. The Bending Stiffness of Corrugated Boards of great importance to achieve a great stacking strength and BCT in the boxes.What primarily determine this Bending Stiffness are the mixture of the corrugated board thickness and the tensile strength of the liner papers.
The 4-PF-50 model 4 POINT BENDING STIFFNESS TESTER allows to:
|
|
|
| |
Burst Tester "Mullen type"
With Laptop PC + Software System Included
To determine the bursting resistance of Paper and Corrugated Board. According to standards: DIN EN ISO UNE 2758 – DIN EN ISO UNE 2759 - SCAN P25/P24 - TAPPI T403 / T807 / 810 PAPTAC D19P/D8 - BS 3137 - AP/AS 1301,403
Standard Features
- Laptop PC (data acquisition and control)
- Testing software - basic level
- Units, in kPa – Kg/cm2 – Bar & PSI
- Measure range from:
- Paper: from 0 to 1500 kPa
- Board: from 200 to 5.000 kPa
- Statistics: Max = Min = Average and Standard Deviation
- Operating security system
- Pneumatic operation of clamping system
- Acrylic protection screen (tests area)
- Compatible with Quality Test Management LYNX Plus & Pro
|
|
| |
 |
|
| |
Samples Crush Tester
With Laptop PC + LYNX Software System Included
The crush tester is used to measure the compressive strength of samples Paper (Liner & Medium) Corrugated Board: ECT - CMT - RCT - CCT- FCT - PAT.
According to standards:
ECT test :APPITA/AS 1301.444s, DIN EN ISO 3037, FEFCO 8, ISO 13821, SCAN P33, TAPPI T 811, TAPPI T 823, TAPPI T 838, TAPPI T 839
FCT test :APPITA/AS 1301.429s, DIN EN ISO 3035, FEFCO No. 6, SCAN P32, TAPPI T 825
RCT test :APPITA/AS 1301.407s, ISO 12192, SCAN P34, TAPPI T 822
CMT test : APPITA/AS 1301.434s, ISO 7263, SCAN P27, TAPPI T809
CCT test :SCAN P42, TAPPI T 843, UNE ISO 16945
PAT test :APPITA/AS 1301.430s, FEFCO No. 11, TAPPI T 821
Standard Features
-
Ultralight PC (data acquisition and control)
- Testing software - basic level
-
Robust construction
-
Easy to use
-
Force range from 10 to 5000 N (resolution 0,01% = 0,5N)
-
Selectable units in N - Kg & lb
-
Statistics: Max - Min - Average & Standard Deviation
-
USB interface and closed loop from PC
-
Automatic return of the inferior plate after every test
-
Overload protection
-
Compatible with Integral Management LYNX Plus & Pro System
|
|
| |
Short Span Compression Tester
Measures compressive strength in short span SCT samples of paper and cardboard to international standards.
Designed to meet standards: ISO 9895 - TAPPI T826 - DIN 54518 - SCAN Q46 - UNE 57142 - BS 7325
Standard Features
|
|
| |
Laboratory Fluter "Concora type"
Is a simple laboratory device to simulate de corrugating of medium paper for CMT
and CCT tests.
According to standards: ISO 7263 - DIN 53143 - TAPPI T809 - CPPA D24 - SCAN P27...
Standard Features
|
|
| |
|
|
| |
Puncture Tester
To determine the resistance or energy absorbed by corrugated board, especially those employed for the manufacture of packaging materials.
Designed to meet standards: UNE ISO 3036 - SCAN P23 - DIN 53142 - TAPPI T-803 - FEFCO 5…
Standard Features
- Strong steel frame, designed to avoid any vibrations during test (Subsequently, energy losses are avoided)
- Touch Screen Controlof 10” and USB port
- Pendulum arm with a circular angle of 90º
- Striking head in the shape of a triangular pyramid
- Release mechanism, with safety system
- Safety cover screen.
- Self-tightening grips with adjustable closing pressure to clamp the sample.
- 4 reading scales of units in Joules
- Reading resolution: 0,01 J (on 4 scales)
- Compatible with our widely popular Test Management System software package LYNX
|
|
| |
Thickness Meter
Effective instrument for quickly and accurately determine the thickness of CORRUGATED CARDBOARD.
According to standards: DIN EN ISO NF UNE 3034 - FEFCO No 3 - SCAN P31...
Standard Features
- Range: 0 a 15 mm
- Resolution: 0,01 mm (10 microns)
- Contact area: 10 cm2
- Contact pressure: 20 kPa ( 200 g/cm2 )
- Digital display with reset to “0” function
- Manual drive by ergonomic handle
- Robust and precise equipment
- Compatible with Quality Integral Management LYNX Plus & Pro System
 |
|
|
COBB Sizing Tester
To determine the capacity of water absorption Corrugated Board.
According to standards: ISO 535 - TAPPI T441 - NF Q 03 018 - NF Q 03 035 - FEFCO 7 - DIN 53132 - EN BS 20535 - SCAN P12...
Standard Features
Quick clamping of the sample (by spring)
|
|
| |
|
|
|
Open Force Tester
NOW, with 15" Laptop PC + LYNX Testing Software + LYNX Management Module with basic statistics, included
This equipment is determines quickly and accurately the force necessary to unfold and to open to boxes and cardboard cases.
Standard Features
- 15" Laptop PC (data acquisition and control)
- LYNX Testing software - basic level
- LYNX Management Module with basic statistics
- Robust and highly accurate
- Load Cell 50 N force capacities
- Memory of the maximum values
- Quick return to initial start position
- With additional grips it is possible to make tests of :
Separation glued lines – Bending – Static & Dynamic Friction Coefficients – Tension / Compression …
-
Compatible with Quality Test Management LYNX Plus and Pro System
|
|
|
| |
|
|
| |
Score Bending Quality Tester "SQT"
NOW with 15" Laptop PC + LYNX Software System Included + LYNX Management Module with basic statistics
According to Standard: TAPPI T829
This equipment is determines quickly and accurately the force necessary to unfold and to open to boxes and cardboard cases.
Standard Features
- 15" Laptop PC (data acquisition and control)
- LYNX Testing software - basic level
- LYNX Management Module with basic statistics
- High precision equipment
- Load Cell 50 N force capacity
- Reading of the Strength with memory of the higher value
- Automatic return to initial test position
- Possibility to carry out the following tests with optional devices:
- Peeling of the glued lines – Opening / Peeling of Cases and Boxes - Friction coefficients (Static /Dynamic) – Tension / Compression …
- Compatible with the Integral Test Management System LYNX Plus & Pro
|
|
|
| |
|
|
| |
Air Permeability / Porosity Meter "GURLEY"
To measure accurately the Air Permeability (or Porosity) of paper and paperboard samples.
According to standards: TAPPI T460 - ASTM D726 - APPITA/AS 1301-420 - BS 5926 - CPPA D.14 - ISO 5636/5...
Standard Features
- Digital reading in seconds
- Cylinder graduated 20 oz. and diameter measuring 1 square inch.
- Salida RS-232
- Compatible with the Integral Managemennt System LYNX Plus & Pro
|
|
| |
Automatic Smoothness and Porosity Meter "GURLEY"
To measure accurately the Smoothness & Air Permeability (or Porosity) of paper and paperboard samples.
According to Standards: TAPPI T460 - TAPPI T536 - TAPPI T490.
Standard Features
- Automatic and manuel test mode
- Output units: BEKK - BENDTSEN - GURLEY - SHEFIELD.
- Choice of various volumes of air
- Automatic calculation of Medium values of Standard Desviations
- Not require use of oil
- Pneumatic operation
- RS-232 output
- Compatible with the Integral Managemennt System LYNX Plus & Pro
|
|
| |
Moisture Analyzer
To accurately measure the moisture Paper and Cardboard. We also can be used as precision balance in other uses within the laboratory.
Standard Features
- Real capacity: 50 g
- Resolution: 0,001 g
- Plate size: 80 mm diameter
- Halogen quartz technology
- Minimun specimen weight: 2 g
- Moisture resolution: 0,01 %
- Drying time: 2 - 20 minutes
- Temperature range of heating: 50 a 160ºC
- Automatic correction of the temperature
- RS-232 output
- Compatible with the Integral Managemennt System LYNX Plus & Pro
|
|
| |
Precision Ovens
For drying samples of Paper and Cardboard and then determine the water content (% moisture) with the help of a Precision Balance .
Standard Features
|
|
| |
Corrugated CardBoard Moisture Meter
To measure the moisture or content in water of Corrugated CardBoard
Standard Features
- Direct reading of moisture in %
- Works with a standard 9V blockbattery
- Easy to use
- With contact electrodes
|
|
| |
Precision Balances
To weighing precision in the laboratory
Standard Features
- Capacity between 110 g until 8000 g, resolutions 0,1 mg to 1 g
- Digital reading
- Stainless Steel plates
- RS-232 Output
- Compatible with the Integral Managemennt System LYNX
|
|
| |
Reflectance Meter PHOTOVOLT 577A
To determine quickly and accurately the degree of whiteness in Paper and Paperboard. Available optionally head to determine the Opacity
Standard Features
- Digital reading
- According ASTM - TAPPI standard
- Compatible with the Integral Managemennt System LYNX Plus & Pro
|
|
|
|
